Moetsi oa li-coil oa ppgi o kentsoeng Ka mebala e bofubelu ba 0.12-3MM

Color coated ppgi coil manufacturer With 0.12-3MM thick red colors Featured Image

Tlhaloso e Khutšoanyane:

Khoeli ea ppgi e nang le mebala e boetse e bitsoa khoele ea tšepe e pentiloeng pele (e khuts'oane bakeng sa "ppgi coil"), e sebelisa galvanized joalo ka substrate.Kamora ho ts'oaroa ha bokaholimo (ho hloekisoa ha lik'hemik'hale le kalafo ea phetoho ea lik'hemik'hale), bokaholimo bo koahetsoe ka lera kapa likarolo tse 'maloa tsa ho roala, ka ho baka le ho folisa, ebe e fetoha PPGI. e phetha karolo ea ho koahela le ho sireletsa 'mala coil coil tšepe, ho thibela tšepe coil ho mafome,' me bophelo ba tšebeletso ea eona ke hoo e ka bang 1.5 linako tse telele ho feta galvanized tšepe khoele.

Filimi ea pente eo re ka e etsang 10-30microns.Ha filimi ea pente e phahame, nako e telele ea bophelo ba tšebeletso ea 'mala.

Lisebelisoa tsa ho penta ke PE, SMP, HDP, PVDF, ects.

'Mala oa pupolar oa coil ea tšepe e pentiloeng pele: veine e khubelu (ral3005), e khubelu ea lelakabe (ral3000), Ruby e khubelu (RAL3003), e khubelu ea Signal(RAL 3001), Coral red(RAL 3016), bofubelu ba sephethephethe(RAL 3020)

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Botenya	0.12mm-1.5mm, (11gauge-36gauge, kapa ho ea ka tlhokahalo ea moreki)
Bophara	750mm-1250mm (kapa ho ea ka tlhokahalo ea moreki)
Standard	GBT2518-2008, ASTM A653,JIS G3302,EN 10142, joalo-joalo.
Kereiti ea lintho tse bonahalang	SGCC/SGCH/CS Mofuta oa A le B/DX51D/DX52D/G550/S280/S350 ETC.
Ho roala zinki	Z30-Z275g
Maemo a mebala	Nomoro ea RAL joalo ka kopo ea moreki
Ho roala	Ho roala ka holimo: 5-30UM
Ho roala	Ho roala ka morao: 5-15UM
Tšepe ea motheo	Tšepe ea Galvanized
Phekolo ea bokaholimo	Passivation kapa Chromated, Skin Pass, Oli kapa Unoiled, kapa khatiso ea Antifinger
Boima ba coil	3-5 lithane kapa joalo ka tlhokahalo ea moreki
Coil ka hare Diameter	508/610mm kapa ho latela kopo ea hau

Mefuta ea ho roala ka tšepe ea tšepe e entsoeng ka pente

1. Pente e ka holimo: PVDF, HDP, SMP, PE, PU

2.Primer Paint: Polyerethane, Epoxy, PE

Pente e ka morao: Epoxy, Polyester e fetotsoeng

prepainted coil coating

Mebala e Fapaneng

Tšebeliso le ts'ebeliso:Koele ea tšepe e pentiloeng, 'mala o koahetsoeng ka tšepe ea tšepe

Likhoele tsa tšepe tse tlotsitsoeng ka mebala li na le lisebelisoa tse ngata, mohlala:
Indasteri ea kaho: lisebelisoa tsa ka ntle: marulelo, mehaho ea marulelo, li- shutter tse kolobisang, li-kiosks, li-shutter, mamati a balebeli, likamore tsa ho leta literateng, likotopo tsa moea, joalo-joalo.
Lisebelisoa tsa motlakase: lihatsetsi, li-air conditioner, litofo tsa elektroniki, likhetla tsa mochini o hlatsoang, litofo tsa oli, joalo-joalo.
Indasteri ea lipalangoang: siling ea koloi, liphanele tse ka morao, li-hoardings, likhetla tsa koloi, literekere, li-bulkheads tsa likepe, joalo-joalo.
Tse sebelisoang haholo:lithupelo tsa sebopeho sa tšepe, lithupelo tsa boto tse kopaneng, le lifeme tsa tšepe tsa mebala.

Sephutheloana
Pakete e tloaelehileng ea ho romelloa ka leoatleng: Mekhahlelo e 3 ea ho paka.

Filimi ea polasetiki karolong ea pele, karolo ea bobeli ke pampiri ea Kraft.Mokhahlelo oa boraro o sirelelitsoe ka pampiri + sephutheloana strip + sekhutlo.

LBH
P: O fana ka mohlala?
A: E, re fana ka sampuli.Mohlala ha o lefelloe, motho ea tsamaisang melaetsa ea machaba ke eena ea ikarabellang.

Litšenyehelo tsa ho tsamaisa melaetsa li tla khutlela ho uena hang ha re sebelisana 'moho.

P: Na u amohela tlhahlobo ea motho oa boraro?
A: E, re amohela tlhahlobo ea motho oa boraro.
P: Nako ea ho fana ke mang?
A: Ka kakaretso 25-35days.
P: O na le stock?
A: Bakeng sa sehlahisoa sa stock, ka kopo ikopanye le rona ho netefatsa.