Ppgl Bobine , bobina de acero prepintado

Tlhaloso e Khutšoanyane:

Ppgl Bobine ke likhoele tsa tšepe tse pentiloeng pele, tse sebelisang tšepe ea galvalume joalo ka substrate.Kamora ho alafa bokaholimo (ho hloekisoa ha lik'hemik'hale le kalafo ea phetoho ea lik'hemik'hale), bokaholimo ba tšepe ba ppgi/ppgl bo koahetsoeng ka lera kapa likarolo tse 'maloa tsa ho roala, ka ho baka le ho phekola, ebe e fetoha PPGL.Ntle le ts'ireletso ea lera la aluzinc, ho roala ha manyolo ka holim'a lera la aluzinc ho phetha karolo ea ho koahela le ho sireletsa 'mala o koahetsoeng ka tšepe ea tšepe, e thibelang tšepe ea tšepe hore e se ke ea mafome,' me bophelo ba eona ba ts'ebeletso bo bolelele ba makhetlo a 1.5 ho feta ba tšepe ea galvalume. khoele.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Video

Li-tag tsa Sehlahisoa

Khoeli ea PPGL

Ppgl color coil paint film eo re ka e etsang 10-30microns.Ha filimi ea pente e phahame, nako e telele ea bophelo ba tšebeletso ea 'mala.

Lisebelisoa tsa ho penta tsa thekiso e chesang ppgl ppgi ke PE, SMP, HDP, PVDF, ects.

'Mala oa pupolar : veine e khubelu (ral3005), e khubelu ea lelakabe (ral3000), Ruby e khubelu(RAL3003), khubelu ea Signal(RAL 3001), Coral red(RAL 3016 ), khubelu ea sephethephethe(RAL 3020)

1. Pente e ka holimo: PVDF, HDP, SMP, PE, PU

2. Primer Paint: Polyerethane, Epoxy, PE

3. Pente e ka morao: Epoxy, Polyester e fetotsoeng

Tlhaloso ea PPGL ea tšepe ea tšepe

Botenya	0.12mm-1.5mm, (11gauge-36gauge, kapa ho ea ka tlhokahalo ea moreki)
Bophara	750mm-1250mm (kapa ho ea ka tlhokahalo ea moreki)
Standard	GBT2518-2008, ASTM A653,JIS G3302,EN 10142, joalo-joalo.
Kereiti ea lintho tse bonahalang	SGCC/SGCH/CS Mofuta oa A le B/DX51D/DX52D/G550/S280/S350 ETC.
Ho roala	Sebaka se entsoeng ka galvanized ka ho roala Zn40-275g Sebaka sa Galvalume se nang le seaparo sa AZ30-AZ150
Maemo a mebala	Nomoro ea RAL joalo ka kopo ea moreki
Ho roala	Ho roala ka holimo: 5-30UM
Ho roala	Ho roala ka morao: 5-15UM
Tšepe ea motheo	Tšepe ea Galvanized
Phekolo ea bokaholimo	Passivation kapa Chromated, Skin Pass, Oli kapa Unoiled, kapa khatiso ea Antifinger
Boima ba coil	3-5 lithane kapa joalo ka tlhokahalo ea moreki
Coil ka hare Diameter	508/610mm kapa ho latela kopo ea hau

Mebala e entsoeng ka tšepe ea Galvalume RAL Mebala

PPGL Coils e na le mebala e fapaneng eo bareki ba e khethang.

Bareki ba ka hlahloba theko ka ral NO.le botenya le bophara.

Kopo ea tšepe ea tšepe ea Galvalume e entsoeng esale pele

Ho ea ka liphuputso tsa indasteri lilemong tsa morao tjena, Prepainted Galvalume Steel Coils e ntse e le mokhoa oa ho hōla kahong, boenjiniere, leruo la liphoofolo, photovoltaics, lisebelisoa tsa lapeng le liindasteri tse ling, haholo-holo tšebeliso ea kaho, leruo la liphoofolo le photovoltaics.

Likhoele tsa PPGL PPGI li na le ts'ebeliso e mengata, mohlala:
Indasteri ea kaho: lits'ebetso tsa kantle: marulelo, meaho ea marulelo, mamati a rolara, li-kiosks, lishutter, mamati a balebeli, likamore tsa ho emela literateng, likotopo tsa moea, jj.
Lisebelisoa tsa motlakase: lihatsetsi, li-air conditioner, litofo tsa elektroniki, likhetla tsa mochini o hlatsoang, litofo tsa oli, joalo-joalo.
Indasteri ea lipalangoang: siling ea likoloi, liphanele tse ka morao, li-hoardings, likhetla tsa koloi, literekere, li-bulkheads tsa likepe, jj.
Tse sebelisoang haholo: lithupelo tsa sebopeho sa tšepe, lithupelo tsa boto tse kopaneng, le lifeme tsa tšepe tsa mebala.

LBH

P: Na u fana ka mohlala oa ppgl coil?
A: E, re fana ka sampuli.Mohlala ha o lefelloe, motho ea tsamaisang melaetsa ea machaba ke eena ea ikarabellang.

Litšenyehelo tsa ho tsamaisa melaetsa li tla khutlela ho uena hang ha re sebelisana 'moho.

P: Na u amohela tlhahlobo ea motho oa boraro?
A: E, re amohela tlhahlobo ea motho oa boraro.
P: Nako ea ho fana ke mang?
A: Ka kakaretso 25-35days.
P: O na le stock?
A: Bakeng sa sehlahisoa sa stock, ka kopo ikopanye le rona ho netefatsa.